Panasonic MINAS A6 Series - Page 57

No. SX-DSV03015 - 54 -
Motor Business Unit, Panasonic Corporation
 Use earth cable having a cross section area of 2.0 mm
2
(AWG 14) or more for an output of 50 W to 2.5 kW,
3.5 mm
2
(AWG 12) or more for an output of 3.0 kW to 5.0 kW, 13.3 mm
2
(AWG 6) or more for an output of
6.0 kW to 11.0 kW, or 21.1 mm
2
(AWG 4) or more for an output of 15 kW.
 For Sizes A - E, use the dedicated connector which came with the product.
In this case, the stripped cable length should be 8-9 mm.
 The tightening torque of connector (X4) with the upper controller should be 0.3 - 0.35 Nm.
The torque which exceeds 0.35 Nm can damage the driver's connector.
Optional part number
Part number of
manufacturer
Manufacturer
Absorber
DV0P1450 RAV-781BXZ-4
Okaya Electric Industries
DV0P4190 RAV-781BWZ-4
DV0PM20050
RAV-801BXZ-4
Ferrite core
DV0P1460 ZCAT3035-1330 TDK
－
RJ8035 Konno Kogyousho
Noise filter
DV0P4170 SUP-EK5-ER-6
Okaya Electric
Industries
DV0P4220 3SUP-HU30-ER-6
DV0P3410 3SUP-HL50-ER-6B
DV0PM20042 3SUP-HU10-ER-6
DV0PM20043 3SUP-HU50-ER-6
－
FN258L-16-07(29)
Schaffner
－
FN258L-30-07(33)
－
FS5559-60-34
－
FS5559-80-34
－
FN258-42-07(33)
－
RTHN-5010
TDK