Panasonic MINAS A6 Series - Page 131

2-91
1
Before Using the Products
2
Preparation
3
Connection
4
Setup
5
Adjustment
6
When in Trouble
7
Supplement
14. How to Use the Front Panel
Monitor Mode (EXECUTION display)
(13) Display of absolute external scale position
• Displays the absolute position of serial absolute scale.
• If a serial incremental scale, displays the scale position relative to the power on position
which is dened as 0.
External scale data
......Absolute external scale position -Low order
......Absolute external scale position -High orde
• Select encoder or external scale by pressing or button.
(14) Display of No. of encoder/ external scale communication errors monitor
No. of communication errors
•
Select encoder or external scale by pressing or button
......Encoder
......External scale
(15) Display of communication axis address
(16) Display of encoder positional deviation [Encoder unit]
Displays the value set to Pr5.31 “Axis address”.
encoder positional deviation [Encoder unit]
......Low order
......High order
• To switch between Low order (L) and High order (H), press .
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com