2-94
14. How to Use the Front Panel
Monitor Mode (EXECUTION display)
(26) Display of safety condition monitor
: Servo-off condition
: Safety condition
: Servo-on condition
: Alarm condition
Servo ready condition
OFF: Dot unlit
ON: Dot lit
Flashing Normal change is possible
Dot information
• Select desired monitor option by pressing or button.
...Input photocoupler OFF
...Input photocoupler ON
...Input photocoupler OFF ...Input photocoupler ON
...Output photocoupler OFF
For manufacturer's use
...Output photocoupler ON
Related page
P.7-2 “safety”.
(25) Display of temperature
Displays the driver temperature [C].
(This is not meter readings but only for reference.)
Displays the encoder temperature [C].
(This is not meter readings but only for reference.)
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
