2-103
1
Before Using the Products
2
Preparation
3
Connection
4
Setup
5
Adjustment
6
When in Trouble
7
Supplement
4) Clearing of Absolute Encoder
You can clear the multi-turn data of the absolute encoder.
Clearing of
absolute encoder
completes
Error occurs
(
When non-applicable
)
encoder is connected
Clearing of absolute encoder starts
Clearing
finishes
• Press to call for
EXECUTION display.
(SET button)
SELECTION display
EXECUTION display
“ ” increases while keep
pressing (for approx. 5sec)
as the left fig. shows.
• Keep pressing until the display changes to
when you execute Clearing of Absolute Encoder.
Note
• After clearing of absolute encoder nishes, return to SELECTION display, referring to struc-
ture of each mode (P.2-76).
14. How to Use the Front Panel
Auxiliary Function Mode (EXECUTION display)
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
To Next Page
Loading...
