- 146 -
3D settings
MENU Menu > Picture > 3D settings
Auto detect 3D
(Auto 1/Auto 2/Off)
Auto 1:
Switches to 3D display when 3D indication is available (HDMI (3D),
AVCHD file, etc.)
Auto 2:
Same as Auto 1. Also detects 3D signal by identifying similar image in
side-by-side or top-and-bottom 3D formats.
Note:
●
Choose 3D mode manually when auto detection is not available.
3D signal notification
(On/Off)
On:
Displays a message according to the signal received by the Auto
detect 3D.
3D refresh rate
(96Hz
/100Hz/120Hz)
Reduces juddering and flicker noises of the 3D images when using the 3D
Eyewear.
100Hz:
If light appears to flicker under fluorescents (or dimmers) of 50 Hz.
120Hz:
If light appears to flicker under fluorescents (or dimmers) of 60 Hz.
●
Gray-out in 2D mode
: 24 Hz only
2D→3D depth
(High/Mid/Low)
Adjusts the simulated 3D depth perception effect of the 2D incoming signal.
To Next Page
Loading...
