Panasonic NCP500 - Flexible Buttons

When You Use a Panasonic Proprietary Telephone
If you use a Panasonic proprietary telephone and the Console, they may have some of the useful feature
buttons described below. For a PS user, refer to "Operating Instructions
" for the PS. These buttons make
operations simple. The illustrations may differ from the buttons on your telephone.
Buttons on the PT
Flexible Buttons:
Used to make or receive an
outside
call (CO button), or as a
feature button. Button
assignment is required.
Refer to "Customized Buttons"
for details.
SP
-
PHONE
SP-PHONE:
Used for hands-free operation.
AUTO DIAL
STORE
AUTO DIAL/STORE:
Used for System/Personal
Speed Dialing or storing
program changes.
PAUSE
PAUSE:
Used to insert a pause when storing a
telephone number. This button also
functions as the PROGRAM button
when
there is no PROGRAM button on
your telephone.
REDIAL
REDIAL:
Used to redial the last dialed
number.
MESSAGE
MESSAGE:
Used to leave a message waiting
indication
or call back the party who left
the message waiting indication.
INTERCOM
INTERCOM:
Used to make or receive
intercom calls.
Soft Buttons:
Used to select the item displayed on
the bottom of the display.
MONITOR
MONITOR:
Used for hands-free dialing.
You can monitor the party’s
voice in hands-free mode.
AUTO ANS
MUTE
AUTO ANS (Auto Answer)/
MUTE:
Used to receive an incoming call in
hands-free mode or mute the
microphone during a conversation.
Document Version 2009-11 Operating Manual 21
1.1.1 Before Operating the Telephones