English
NE-1037
- 15 -
How to Operate
D. Program Lock
√
To Activate Program Lock:
This procedure locks the Memory Pads into their programmed heating times and power levels.
DO NOT OPEN THE DOOR.
1.
PAD INSTRUCTION
≥The display window must be blank.
≥Press and hold in the Program Pad (for
5 seconds) until the display shows “P”and “L”.
≥Program Lock feature is now activated.
NOTE: ≥In “Program Lock”
a. To activate preset programs, open door will display “0”.
b. The oven is started by pressing the desired Memory Pad. There is no need to press the Start Pad.
c. The interrupt feature is deactivated—Open the door cancels the remaining time of the program.
d. The oven cannot be programmed until the Program Lock is released.
√
To Pelease Program Lock:
This procedure releases “Program Lock” and activates all other features. The Oven reverts to a 2 touch
operating mode (Memory Pad plus Start Pad).
DO NOT OPEN THE DOOR.
1.
PAD INSTRUCTION
≥The display window must be blank.
≥Press the Stop/Reset Pad.
While pressing this pad, press the Program Pad
(for 5 seconds) until the display shows “P”.
≥Program Lock feature is now released.
NOTE: ≥In “Program Unlock”
a. Repeat and interrupt features are operational.
b. Memory Pads can be programmed.
c. Beep Tone can be set On or Off.
+
To Next Page
Loading...
