- 10 -
How to Operate
C. Programmed Heating:
Example: 1 stage; Memory Pad 9 to heat for 3 minutes at HIGH Power
Display Window
1.
• Press the Memory Pad 9.
In Program Lock Mode oven will start without
pressing START Pad. See page 14.
2.
• Press the START Pad.
Heating will start.
The time in the Display Window will count
down.
3. Beep tone will sound. • All heating will stop.
When opening the door, the display
will stop blinking.
Example: 2 stage; Memory Pad 3 (to heat for 3 minutes at HIGH and 2 minutes at DEFROST)
See page 12 to program Memory Pad.
See page 14 to activate Program Lock.
Display Window
1.
• Press the Memory Pad 3.
In Program Lock Mode oven will start without
pressing START Pad. See page 14.
2. • Press the START Pad.
The total time for both stages will be
displayed. The time in the Display Window
will count down. Heating will start.
• When the oven shifts to the next stage, a
single beep tone will sound.
3. Beep tone will sound. • All heating will stop.
When opening the door, the display will stop
blinking.
To Select Multiple Portion Heating:
The Double Quantity Pad (x 2) is factory set to automatically double the programmed time for multiple portion heating.
Example: Memory Pad 5
Display Window
1.
• Press the DOUBLE QUANTITY (x 2) Pad.
2.
• Press the Memory Pad 5.
In Program Lock Mode oven will start
without pressing START Pad. See page 14.
3. Follow steps 2-3 above.
IP5102_3BS80RP_Eng_10_150121.indd 10IP5102_3BS80RP_Eng_10_150121.indd 10 2015-1-21 10:00:342015-1-21 10:00:34
To Next Page
Loading...
