- 15 -
How to Operate
C. To Read Program List:
Allows you to review all currently programmed Pad Number, heating time and power level for each stage.
1. Open the door.
Display Window
2.
+
• While pressing the STOP/RESET Pad,
press and hold in the START Pad. The
Beep Tone setting will show in the Display
Window.
Example: Stage Indicator 1: Beep tone is ON
Stage Indicator 2: Beep tone is OFF
2 seconds later, the Program Lock setting will
show in the Display Window.
Program Lock : "P L"
Program Unlock: "P"
3. • Press Memory Pad you desired to read
program.
Example: The Memory Pad Number 5.
Display Window will display;
Program Memory Pad Number 5, first stage
heating time and power level currently
programmed on Memory Pad.
2 seconds later, the same information will
be displayed for the 2nd and 3rd stage
heating.
• After all settings have been displayed,
the Pad Number and the Stage Heating
Indicator will appear in the Display Window
again.
NOTE: • If you want to go to another program, press the Memory Pad you desired to read program, while the information of
Memory Pad is being displayed. .
• If you want to show the Multiple Portion Heating (x 2) program, press the DOUBLE QUANTITY Pad before pressing
the Memory Pad.
IP5102_3BS80RP_Eng_10_150121.indd 15IP5102_3BS80RP_Eng_10_150121.indd 15 2015-1-21 10:00:352015-1-21 10:00:35
To Next Page
Loading...
