- 16 -
How to Operate
D. To Select Beep Tone Options:
The Beep Tone can be set, ON or OFF. Display Window
1. Open the door.
2.
• Press the PROG. Pad.
The display will not change.
3. • Press the Memory Pad 0.
• Repeat pressing of 0 Pad. Select "OFF" of
Beep Tone.
Stage Indicator 1 =ON
Stage Indicator 2 =OFF
4.
• Press the PROG. Pad again.
You have completed programming the beep
tone.
• 2 seconds later, the Display Window will go
blank.
E. To Read the Cycle Counter:
The oven can display the total number of times the oven has been operated cumulatively.
Great for analyzing usage of the oven and traffic flow at the location.
Display Window
1. Open the door.
2.
+
• While pressing STOP/RESET Pad, press
POWER Level Selector Pad. The display
shows the total cumulative number of times
the oven has been used.
Example:
• 9999 means, the oven has been
used 999900 times.
• 0020 means the oven has been
used 2000 times.
• If the total cumulative number of
times less than 100 times, the
display will not be changed.
• 2 seconds later, "0" will reappear in the
Display Window.
IP5102_3BS80RP_Eng_10_150121.indd 16IP5102_3BS80RP_Eng_10_150121.indd 16 2015-1-21 10:00:352015-1-21 10:00:35
To Next Page
Loading...
