EasyManua.ls Logo

Panasonic NE-1054F - Heating; Manual Single Stage Heating; Manual 2 or 3 Stage Heating

Panasonic NE-1054F
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 9 -
How to Operate
HEATING
Open the door and place food in the oven cavity. Close the door. "0" must be showing in the Display Window.
A. Manual Single Stage Heating:
This feature gives the user maximum exibility to set the oven to desired heating time and power level. Ideal for menus that
require various heating requirements.
Example: To heat for 2 minutes at High Power
Display Window
1.
Press the POWER Level Selector Pad one
time.
2.
• Press the Memory Pads 2, 0 and 0.
3.
• Press the START Pad.
Heating will start.
The time in the Display Window will count
down.
4. Beep tone will sound. All heating will stop.
When opening the door, the display will stop
blinking.
B. Manual 2 or 3 Stage Heating:
This feature allows you to set to begin heating at one power level then shift automatically to a different power level after the
designated amount of heating time.
Example: To heat for 2 minutes at Defrost power for 2 stage heating
1. Follow steps 1 and 2 above.
Display Window
2.
Press the POWER Level Selector Pad 5
times. Indicator will change each time the
pad is pressed.
3. • Press the Memory Pads 2, 0 and 0.
4. • Press the START Pad.
The total time for both stages will be
displayed. The oven lamp will be turned on.
Heating will start.
The time in the Display Window will count
down.
When oven shifts to the next stage, a single
beep tone will sound.
5. Beep tone will sound. All heating will stop.
When opening the door, the display will stop
blinking.
NOTE:
For a 3 stage heating cycle, select a power level again and set the cooking time, between steps 3 and 4 above.
SPECIAL NOTE: For both single and 2 or 3 stage heating.
1. While heating, one touch on the STOP/RESET Pad stops the oven. You can restart by pressing the START Pad or a second
touch on the STOP/RESET Pad will cancel the selected program.
2. One touch on the STOP/RESET Pad, before the heating cycle is started, will cancel the selected program.
IP5102_3BS80RP_Eng_10_150121.indd 9IP5102_3BS80RP_Eng_10_150121.indd 9 2015-1-21 10:00:332015-1-21 10:00:33

Other manuals for Panasonic NE-1054F

Related product manuals