Panasonic NI-E200T - Page 12

FABRIC IRONING CHART
NOTES: 1. Check fabric for specific ironing instructions, Always follow manufacturer's
instructions.
2. Iron blended fabrics at setting for lower-temperature fiber or for the
highest-percentage fiber.
3. Use caution, some synthetics may melt at high temperature.
Temperature
oe
ii
Selector
Setting
roning
Recommendations
ACRYLIC
* ACRILAN Dry iron on reverse side, or use a press cloth on top of
x CRESLAN fabric. Don't sprinkle water directly on fabric to avoid
1
(Acrylic)
*
ORLON
spots.
ACETATE To iron suede, cover with brown paper and use it as a
METALLICS press cloth.
SUEDE
NYLON
. * ANTORON
Dry iron on reverse side.
2 (Silk) x CAPROLAN
SILK
Steam ironing is suggested. Never iron until completely dry,
WOOL but leave it with a little moisture. To iron velvet, use steam
3 (Wool) VELVET but do not let the iron touch the fabric. Hold it slightly above
the surface.
Steam ironing is suggested. Sprinkle water on the fabric,
À (Cotton) COTTON depending onits thickness. Iron dark fabric on reverse
side to avoid unwanted sheen.
| Steam ironing is suggested. Iron dark fabrics on reverse
* Trademarks of Fiber Manufacturers.
-12-