48
Operation (continued)
Cleaning the water tank
Clean with a soft sponge in water.
Remove the water tank and clean the compartment where the
water tank is inserted.
Open the water supply cap, remove the lid and pipe cap and
clean.
Pipe cap
Ensure it faces downwards
If the pipe cap is difficult to remove, wiggle from side to side.
When re-fitting, make sure that the pipe faces down (see diagram).
The rubber seal of the tank can also be removed for cleaning.
Removing the Rubber Seal
Ensure that the rubber seal is not
inside out when re-fitting. If the seal
is not fitted correctly the lid will not
close securely and it will leak.
Inside
(flat)
Outside
(protruding side)
NOTES
1. Clean the water tank at least once a week to prevent build up of limescale.
2. Do not use a dishwasher to clean the water tank or parts of the water tank.
F0003CJ80CP_EN_0117.indd 48 2021/1/17 10:43:14
To Next Page
Loading...
