as accurately as possible.
1. Fill the beaker with exactly one liter of tap water.Stir the water
using the thermometer and record the water’s temperature.
(recorded as T1).
2. Place the beaker on the center of glass tray. / Set the oven for
High power and heat it for exactly one minute.
3. Stir the water again and read the temperature of the water.
(recorded as T2).
4. The normal temperature rise at High power level for each model,
is as shown in table.
TABLE (1L-1min.test)
RATED OUTPUT TEMPERATURE RISE
1100W(IEC705-88) Min.16.9°F (9.4°C)
1200W(IEC705-88) Min.18.5°F (10.3°C)
3. EXPLODED VIEW AND PARTS LIST
3.1. EXPLODED VIEW
3.2. PARTS LIST
NOTE:
9
To Next Page
Loading...
