En-6
Parts of your Oven
1. Always refer to instructions for correct
accessories to use on all programs.
2. The roller ring and oven floor should be
cleaned frequently to prevent excessive noise.
3. Always operate the oven with the roller ring
and glass tray in place.
4. Only use the glass tray specifically designed
for this oven. Do not substitute with any other
glass tray.
5. Do not cook directly on glass tray.
Always place food in a microwave safe dish.
6. If glass tray is hot, allow to cool before
cleaning or placing in water.
7. If food or utensils on the glass tray touch the
oven walls, this will cause the tray to stop
moving. It will then automatically rotate in the
opposite direction. This is normal. Open oven
door, reposition the food and restart.
8. The glass tray can rotate in either direction.
The maximum weight that can be placed on
the tray is 3 kg (6 lb. 10 oz.) (this includes total
weight of food and dish).
9. While cooking the glass tray may vibrate. This
will not affect cooking performance.
External Air Vents
Roller Ring
Glass Tray
Power Supply Cord
Power Supply Plug
Microwave Feed Guide
(Do not remove.)
Control Panel
Oven Window
Pull Door Handle
Pull to open the door. Opening the door during cooking will
stop the cooking process without cancelling the program. For
NN-SM332W, cook resumes as soon as the door is closed. For
NN-ST342W/M, cook resumes after the door is closed and
is pressed. It is quite safe to open the door at any time during a
cooking program and there is no risk of microwave exposure.
Caution label is attached on the outside surface.
Note: The illustration is for reference only.
To Next Page
Loading...
