65
10.11. Replacement of Thermal Fuse
Assy.
1. Disconnect thermal fuse connector. (black connector)
2. Remove the thermal fuse by pulling it. (mounted on the
left side of the evaporator)
Take out the thermal fuse.
Note: Be sure to replace both thermal fuse and
defrost sensor, in case that thermal fuse is blown.
10.12. Replacement of DFC
1. Cut the cable tie.
2. Disconnect to defrost sensor connector.
3. You can take out the defrost sensor by removing the alu-
minum tape on it.
10.13. Replacement of FCC
1. Remove the freezer sensor cover by pulling forward and
disconnect sensor connector.
To Next Page
Loading...
