68
2. Take out the switch using a sharp/thin tipped tool. Try to
stretch it from one side, then remove it with your hand by
pulling forward.
3. Disconnect the connector and replace the switch.
4. Cable colors and numbers must match at switch replace-
ment.
10.18. Changing The Doorway Direc-
tion
Warning: Make sure the unit is unplugged.
1. Unscrew the screw fixing the Top Hinge Cover and
remove it.
2. Disconnect the Display Connector.
3. Unscrew the screws fixing the Top Hinge and remove it.
To Next Page
Loading...
