70
10. Unscrew the Stationary Foot on the left side.
11. Unscrew the side panel fixing screws.
12. Then use that screw for the right side.
NOTICE
Be careful to screw stronger. Because the screw
hole has blocked with the expanded polyurethane.
13. Screw the Stationary Foot for the right side.
14. Insert the Flat screwdriver into the gap between the
Spacer and the Bottom Hinge. Then pry off the Spacer.
Unscrew the pin of hinge, rotate the Bottom Hinge 180°.
15. Screw the pin to the same hole from different direction.
Paste the Spacer to the opposite side of the Bottom
Hinge.
To Next Page
Loading...
