71
16. Then screw the Bottom Hinge to the left side.
17. Screw the Stationary Foot for the left side.
18. Remove the Door Handle Screw Cap and Middle Hinge
Screw Caps on the left side.
19. Then insert that Door Handle Screw Cap and Middle
Hinge Screw Caps on the right side.
20. Put up the appliance.
21. Detach a right Bushing, and insert it in the left hole.
22. Remove a left Bushing Cap,and insert it in the left hole.
23. Turn the FC Door upside down.
24. Remove the Catcher Right of FC Door.
To Next Page
Loading...
