73
30. Insert the new Catcher Left in left. (You can find the new
Catcher Left in the user manuel bag)
NOTICE
The screw hole is not open. Please drill it by an
electric drill as like FC Door's Catcher Left.
31. Remove the Bushing Cover and pull the Cable to outside.
The Bushing Cover is used on the right side.
32. Fold and insert the lead wire as shown in figure and
insert the bushing cover to the left side.
33. Unscrew the Hinge Pin and rotate the pin upside down
then fix it to right side of the Top Hinge.
34. Swap the Head Panel Covers.
To Next Page
Loading...
