32
3. Press the hook down, remove the Holder Ag.
4. Take the small Ag Filter board out from 2 hooks, discon-
nect the connector.
THE POINT OF REPLACEMENT OF AG FILTER
• Pull Ag Filter out softly from hooks of Holder Ag.
5. Remove the fixed screw (one) in a (+) screwdriver, then
remove the Sensor PC Cover, you can see the Sensor
PC inside the PC room.
THE POINT OF WORK
How to use scotch lock
Scotch lock is used when a branch circuit is made in par-
allel or is connected with the series with a DC electric cir-
cuit.
To Next Page
Loading...
