47
3. Does the Door open and close smoothly?
(Did you apply the grease of bundled parts around the
part of hinge?)
4. (4)Is there any sound when the Door open and close?
5. Does some character appear on the control display, after
turn it on?
6. Can you set a temperature by pressing any button?
• When there is not any trouble above, you install some
trays and shelves in reverse side of Door A'ssy PC as
before.
NOTES
• Wipe a grease off with a new or cleaned cloth, after Stopper
Door R and Latch Door R are removed.
• Stopper Door R and Latch Door R, Hinge Top R etc. that are
removed are needed to return to the Door Setting. Please
keep them carefully.
To Next Page
Loading...
