34
9. While unhooking the rib at the center of PCB box by using
the screwdriver.
10. Draw out the PCB box toward you and change the elec-
tric wire direction.
11.
Screw the screws fixing the Head Panel Cover
Center.
12. Slide the Head Panel Cover Left and Head Panel
Cover Right then fix it.
13. Unscrew the Middle Hinge fixing screw and remove it.
14.
Remove the FC Door.
15. Remove the Middle Hinge Plugs and the Screw cap
then unscrew the screw.
16. Screw the screw.
Install the Middle Hinge Plugs and the Screw cap.
To Next Page
Loading...
