NR-BW414 / NR-BW464
- 21 -
• Countermeasure No. 1
To add insulation plate 2 pcs on cover coil
and inner liner as below instruction.
1.1 To add insulation on rear of cover coil.
1.2 To add insulation on inner liner.
Insulation plate
Insulation plate
Cover coil
Coil EVP. Inner Liner
Cover coil Add insulation on rear of Cover coil
Make hole before re-assemble
support coil
Assemble support coil to inner liner.
Cable tie lock with tube of coil EVP.Ref.2 Add cable tie 1 pcs
Add insulation on rear of Cover coil
Deflector at tube coil 1pcs.
Romve coil EVP from support coil
Remove Deflector Remove screw of support coil.
To Next Page
Loading...
