NR-BW414 / NR-BW464
- 24 -
• Countermeasure No. 1
To addition insulation plate 2 pcs on cover coil and inner liner as below instruction.
1.1 To addition insulation plate on rear of cover coil.
1.2 To addition insulation on inner liner.
Insulation plate
Insulation plate
Cover coil
Coil EVP. Inner Liner
Cover coil F Add insulation plate
Make few hole before re-assemble
support coil to inner liner.
Assemble support coil to inner liner.
Ref.2 Cable tie 1 pcs lock with tube
of coil EVP.
Ref.2 Add cable tie 1 pcs
Add Insulation plate to rear of Coil EVP.
Deflector at tube coil 1pcs.
Romve coil EVP.
Remove Deflector for empty. Remove screw support coil.
To Next Page
Loading...
