EasyManua.ls Logo

Panasonic NR-F503GT-T6 - Smell and Cooling Issues

Panasonic NR-F503GT-T6
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
Appendix
Smell
Ice smells.
Clean the water supply tank and water purification filter once a week. (P. 19)
Do not use cleaning agent or bleach for washing the water supply tank
and the water purification filter.
Replace the water purification filter every 3 year. (Separately sold part: P. 27)
The interior smells.
Store strong smelling food in airtight containers.
Odor often attaches to the interior walls.
Wipe the walls with a soft cloth soaked in lukewarm water.
Cooling
Does not get cold at all.
If is indicated in the notice indicator area of the control panel, cancel
the demo mode. (P. 26)
Make sure that there is no power failure, the power cord is connected to
the outlet or the breaker is not operated.
Does not get cold enough.
When you use the refrigerator for the first time, it will take 4 to 24 hours or
more (in the summer time, etc.) until the refrigerator begins to cool.
Change the temperature setting to the colder setting. (P. 8)
Make sure that foods are not blocking the cold air outlet. (P. 2)
Do not place the refrigerator where it is subjected to direct sunlight. (P. 6)
Secure sufficient spaces around the refrigerator. (P. 6)
It may take the refrigerator longer time to be cooled if food is stuffed too
much or “Fresh Freezing” is used for a long time.
Frost and dew
Do not keep the door open for a long time or open frequently when
humidity is high.
When a store bought accessory such as a tube stand is caught in the
door, remove it.
If food is fallen in the back from the case in the freezer compartment or
the vegetable compartment, the door is not closed properly. Remove the
food.
Frost or dew may be formed on the outer surface of the refrigerator when
humidity is high.
Wipe with a piece of dry cloth.
The food is frozen.
Set the temperature setting to “2” (or “1”). (P. 8)
Is the ambient temperature 5 °C or below?
→ Set the temperature setting to “1”. (P. 8)
Do not put food with high water content near the cold air outlet in the
refrigerator (P. 2) or in the prime fresh/chilled select room.
Prime Fresh
Prime Fresh Quick Mode is
stopped soon, or stopped
in the middle of operation.
In the following cases, the time for the quick mode may become short (it
returns to the normal Prime Fresh operation from the quick mode shortly).
Immediately after the completion of the quick mode.
When the refrigerator judges the quick mode is not necessary based on
the amount of food or temperature.
During defrosting.
When the temperature of the refrigerator compartment or the freezer
compartment is high.
Depending on the usage conditions, the quick mode may stop and
re-start after the temperature inside the compartment is stable.

Table of Contents

Related product manuals