1-1. Introduction
KX-NS1000 provides two methods of private networking:
1.
O
ne-Look Networking
2.
Q
SIG Networking (via ISDN and H.323)
This module will focus on the new NS1000 feature “One-Look Networking”.
• The main benefits of One-look networking are;
• It looks like one PBX system, even though two or more PBXs are networked together.
• The system can be expanded easily via a Web based maintenance console.
• No additional servers are required for call control.
• The main differences between “One-look” and “QSIG” Networking are the following;
• For “One-look”, the ‘Master’ PBX controls all extensions within the network.
In a “QSIG” network, each PBX controls its own extensions.
• For “QSIG”, each PBX needs to be programmed individually.
For “One-look”, almost all settings are made in the master PBX only.
• “QSIG” is suitable for connecting the NS1000 to the existing KX-TDE/NCP systems, or whe
n
t
here are 17 or more NS1000s in the network.
• “One-Look” is available for up to 16 connected NS1000 systems (Max)
To Next Page
Loading...
