‘Settings’ -> Network Service->
51. IP-Address/Ports -> Advanced Settings
Set LAN/MNT port Speed / Duplex
Enable Port mirroring via MNT Port.
(Installer Level Only)
7.2 Port Settings
Port Settings (Speed / Duplex / Mirroring)
The Speed / Duplex settings of the LAN / MNT ports can be set here.
The MNT port can also be configured as a Mirror port.
NB: Once Port Mirroring is enabled on the MNT Port, you will not be able to use the MNT port to access the WebMC. Use the LAN
port to login and change the port mirror settings back.
To Next Page
Loading...
