Set the PC as a
DHCP client.
- Ethernet cable with an RJ45 connector
- Maximum Distance: 100 m
The MNT port is set as a DHCP server.
2-2. Available Connections (1/3)
In order to program or manage the PBX, you need to connect your PC to the PBX.
Several connection methods are provided, and here you can see the outline of the direct connection.
1. D
irect Connection (MNT Port)
If the PC has “Gigabit Ethernet interface”, an Ethernet “crossover cable may be needed.
It depends on the specification of the PC.
To Next Page
Loading...
