Panasonic NS1000 - Page 95

3.2 Manual Registration Mode – UT series
1. Registering an IP-PT to the PBX (Manual Registration Mode) – cont….
(UT-PT IP Address Setting)
3. Using the ‘Navi-Key’, select
‘Network Settings’ and press ‘Enter’.
4. Select ‘Network’
6. Then set the IP-Address, Subnet Mask
and Default Gateway of the IP-PT, using the
‘Navi-key’, Keypad and ‘Enter’ keys etc
Information Display
Network Settings
ENTER
Back
Enter
Network
VLAN
Back
Enter
DHCP
STATIC
Back
Enter
NAVI-KEY
5. Select ‘STATIC’ for the IP Address mode
IP Address
192.168.0.153
Back
Enter
Subnet mask
255.255.255.0
Back
Enter
Default Gateway
192.168.0.1
Back
Enter