EN10
Remove all packaging materials and tape in advance; clean your product according to the
steps below before using it for the first time or after a long time without using it.
1.
Clean all accessories. (See P. EN17)
2.
Turn the temperature control knob set temperature to 230 ºC, and set the timer to bake
for 10 minutes.
●
There may be odors emitted when using your product for the first time. This is normal
and is caused by the protective coating for salt corrosion on the heater used for
transportation.
●
Oven may generate noise in the first idle run. This is normal.
●
When running the oven in idle, the oven will emit some smoke and odors. Please open
the door to dissipate the smoke. This will never occur the next time.
●
Please wait for the oven to cool down before using it after the idle run.
Note
Before Use
To Next Page
Loading...
