EN18
Check the following before calling for
maintenance service.
Problems Cause and solution
Baking
failure
●
The power plug is not fully inserted.
➜
Insert the power plug completely into the socket.
●
Error encountered
➜
Consult the place of purchase or a Panasonic service center.
Odor
●
The baking time is too long.
➜Power off your product, disconnect the power cord, and remove
any food that causes odors in the oven.
●
The baking tray releases an odor or there is food
residue on the cooking rack.
➜
Clean the baking tray and the cooking rack.
●
Confirm if there are any drippings of grease or crumbs in the
crumb tray.
➜
Clean the crumb tray.
Troubleshooting
Specifications
●
After the power plug is inserted into the socket, the standby power is 0 W.
Power supply See the label on the back of appliance
Power consumption See the label on the back of appliance
Capacity 9 L
Cavity temperature Setup value: 70 - 230 °C (tolerance: ± 30 ºC)
Automatic thermolator Adjustable thermostat Upper heater 510 W
Timer 15 minutes Lower heater 490 W
Net weight (approx.) 3.1 kg
Power cord length 1.0 m
External dimension Width: 36.6 cm Depth: 27.4 cm Height: 20.4 cm
Inner chamber Width: 26.9 cm Depth: 20.2 cm Height: 16.9 cm
Size (approx.)
Function switching
(approx.)
To Next Page
Loading...
