- Eng-53 -
English
Oven Cleaning Setting
(continued)
Cleaning (Citric acid)
If “ ” appears in the display window after cooking, you should use citric acid to clean the water-piping. After
using citric acid to clean, rinse with water again. Flush and clean water will drain into the drip tray. (need 30
minutes) Prepare detergent with approximately 20 g of citric acid dissolved completely in 250 ml of water, and
pour the mixture into the water tank of the oven directly.
ò
Select Auto Menus by using
the slider bar or press
/
pad.
ù
Press Set pad to set Auto Menus.
Note: Empty the drip tray and
check prepared detergent in the
water tank.
ä
Slide slider bar or press
/ pad until “35” appear in
the display window.
ë
Press Start pad once.
ö
After the program is automatically
paused, you can remove water
in drip tray and clean the water
tank, then fi ll the tank with water.
ü
Press Start pad once. Program
will continue one minute.
Notes:
1. After cleaning, please wiped the residue in the water tank and wash the drip tray clean.
2. Do not remove the drip tray when using this function.
F0003CE30HP_eng.indd 53F0003CE30HP_eng.indd 53 2018/8/20 18:01:242018/8/20 18:01:24
To Next Page
Loading...
