Panasonic NV-DS29B - Jammed Tape Removal; Jammed Tape Removal Steps

Using the Menu Screen
To facilitate the selection of a desired function or setup, this Movie
Camera displays various function setups on Menus.
1+ Press the [MENU] Button.
The Menu corresponding to the Mode selected by using the
{VCR/OFF/CAMERA] Switch @ is displayed.
2 Turn the [PUSH] Dial to select a desired Sub-Menu.
Turn the [PUSH] Dial to display the highlightened item.
3 Press the [PUSH] Dial to display the selected Sub-
Menu.
4 Turn the [PUSH] Dial to select the item to be set.
5 Press the [PUSH] Dial to set the selected item to a
desired mode.
With each pressing of the [PUSH] Dial, the cursor [ »] moves
to the next mode.
While a Menu is displayed, you cannot record or play back, Menus
can be displayed during playback but not during recording. The
above operations can be done using the [MENU] Button, [SET]
Button and {ITEM] Button on the Remote Controller. (-> 10)
To Exit the Menu Screen
Press the [MENU} Button again.
About the Menu Mode Setting
The setting selected on the Menu will be retained even when the
Movie Camera is turned off. However, if the Battery or AC Adaptor is
disconnected before turning off the Movie Camera, the selected
setup may not be retained.
Menu operation flow is shown in this text by >>,