Panasonic NV-DS29B - Disassembly;Assembly Procedures; Cabinet Section Procedures; Disassembly Flowchart

(s]
Hi Recording Yourself
By
opening
the
LCD
Monitor
and
rotating
it
frontward
(to
the
lens
side),
you
can
let
the
subject
in
front
of
the
Movie
Camera
monitor
the shot while recording is in progress.
When the LCD Monitor is opened, the Viewfinder is disabled
automatically. However, when the LCD Monitor is rotated
frontward, the image is also shown in the Viewfinder.
© If you prefer to have the image on the LCD Monitor to look like an
- image in a mirror, set [SELFSHOOT] on the [OTHER
FUNCTIONS} Sub-Menu to [MIRROR].
Images are recorded normally and no left and right reversal
occurs.
WRecording with the Built-in Video Light
By
using
the
Built-in
Video
Light,
you
can
record
the
scenes
in
the
dark place.
elf you Press the [LIGHT} Button @ for about 1-second, the Built-in
Video Light lights. (The [3D] Indication @ is displayed.)
To turn the Built-in Video Light off, press the (LIGHT] Button for
about 1 second.
The subject should be within 2 metres of the Movie Camera.
HELP Mode
A desired recording speed can be selected with [REC SPEED] on
the [RECORDING SETUP] Sub-Menu.
If
LP
Mode
is
selected,
the
recording
time
becomes
1.5
times
longer than that of SP Mode.
Although the image quality does not decrease with the LP Mode
recording, mosaic-pattern noise may appear on a playback image,
or some normal functions may be restricted.
The contents that are recorded in LP Mode are not completely
compatible with other equipment.
Audio dubbing is not possible with LP Mode. (> 37)
HAudio Recording Mode
The sound quality of the recorded sound can be selected with
[AUDIO REC] on the [RECORDING SETUP] Sub-Menu. High
sound-quality recording is possible with “16 bit 48 kHz 2 track”
Mode.
With
the
“12
bit
32
kHz
4
track”
Mode,
the
original
sound
can
be recorded on 2 tracks in stereo, while the other 2 tracks can be
used for Audio Dubbing.
For other notes concerning this item, see page 42.
21