Panasonic NV-DS29B - Warning;Alarm Indications

WTo Change the Counter Display
Mode
By changing [C.DISPLAY] on the [DISPLAY
SETUP] Sub-Menu, you'can change the Counter
Display Mode to Tape Counter Indication
[COUNTER] (0:00.00), Memory Counter Indication
[MEMORY]
(M0:00.00),
and
Time
Code
Indication
[TIMECODE] (OhOOm00s001). (-» 16) By repeatedly
pressing the [COUNTER] Button on the Remote
Controller,
you
can
change
the
Counter
Display
Mode.
HITo Display Date/Time Indication
To
display
Date/Time
Indication,
set
the
appropriate
Date/Time in [DATE/TIME] on the [DISPLAY
SETUP] Sub-Menu. (> 16)
You
can
also
press
the
[DATE/TIME]
Button
of
the
Remote Controller repeatedly to display or change
the Date/Time Indication.
[To Change the Display Mode
By
changing
[DISPLAY]
on
the
{DISPLAY
SETUP]
Sub-Menu, you can change the Display Mode to All
Function Display [ALL], Partial Display [PARTIAL],
and Minimum Display [OFF].
Warning/Alarm Indications
If any one of the following indications lights up or
flashes, please check the condition of the Movie
Camera.
Some indications may not be displayed according
to the model.
fa:
Condensation
has
occurred.
(->
46)
Gg: The accidental erasure prevention
slider on the inserted Cassette is
apen (that is, set to [SAVE]).
- You are about to do audio dubbing
on the unrecorded (blank) portion of
the tape.
No Cassette is inserted. (> 14)
NM:
The
Battery
is
low.
Recharge
it.
(> 12)
&: The built-in battery is discharged.
(> 19)
@: The video heads are dirty. (- 46)
@HEND: The tape came to end during
recording.
REMOTE:
Wrong
Remote
Controller
Mode
has been selected. (-> 42)
UNPLAYABLE TAPE (OTHER FORMAT):
You are attempting to play back
a tape section that has been
recorded with a different TV
system.
UNABLE TO A. DUB (LP RECORDED):
Because the original recording
was done in LP Mode, audio
dubbing cannot be performed.
INCOMPATIBLE TAPE:
This Cassette is incompatible.
Because the medium is
protected by a copy guard,
images cannot be recorded
correctly:
COPY INHIBITED: