Panasonic NV-GS30 - Picture-in-Picture Mode

Camera Mode
-26-
To Select a Desired Digital Effect
Set [CAMERA FUNCTIONS] >>
[DIGITAL EFFECT] >> [EFFECT1] or [EFFECT2]
>> a desired Digital Effect.
To Cancel the Digital Effect
Set [CAMERA FUNCTIONS] >>
[DIGITAL EFFECT] >> [EFFECT1] or [EFFECT2]
>> [OFF].
≥If the Movie Camera is turned off, the
[EFFECT2] settings are cancelled.
≥For other notes concerning this item, see
-40-.
ª Wipe Mode and Mix Mode
Wipe Mode:
Like a curtain is being pulled, the still picture of
the last recorded scene gradually changes to the
moving image of a new scene.
Mix Mode:
While the moving image of a new scene fades in,
the still image of the last recorded scene
gradually fades out.
1 Set [CAMERA FUNCTIONS] >>
[DIGITAL EFFECT] >> [EFFECT1] >> [WIPE]
or [MIX].
≥The [WIPE] or [MIX] Indication appears.
2 Press the Recording Start/Stop Button (3 8)
to start recording.
WIPE
WIPE
WIPE
MIX
MIX
MIX
M
E
N
U
PUSH
MF/VOL/JOG
WB/SHUTTER/IRIS/
(40) (32)
(38)
3 Press the Recording Start/Stop Button (38)
to pause the recording.
≥The last scene is stored in memory. The
[WIPE] or [MIX] Indication changes to [B]
or [C].
4 Press the Recording Start/Stop Button (38)
to restart the recording.
≥The last image of the previous scene
gradually changes to the new scene.
≥For other notes concerning this item, see
-40-.
ª Picture-in-Picture Mode
You can display a sub-screen (still picture) inside
the screen.
1 Set [CAMERA FUNCTIONS] >>
[DIGITAL EFFECT] >> [EFFECT1] >>
[P-IN-P].
2 Set [CAMERA FUNCTIONS] >>
[MULTI-PICTURES] >> [P-IN-P] >> a position
(1, 2, 3, 4) where you want to insert a
small still picture.
3 Aim the Movie Camera at the scene you
want to capture and press the [P-IN-P]
Button
(9) to insert a small still picture.
≥A small still picture is displayed in a normal
picture.
≥If the [P-IN-P] Button is pressed again, the
small still picture is cleared.
M
E
N
U
PUSH
MF/VOL/JOG
WB/SHUTTER/IRIS/
(40) (32)
12
34
MULTI/
P-IN-P
(9)
30B-ENG.book 26 ページ ２００３年１月２３日 木曜日 午後８時４６分