Panasonic NV-HD670 Series - Page 5

SSS
SSS
OSS
@ Shuttle Ring
e@ ©
e6 e686 6 8
In
the
stop
mode:
Rewinds
or
fast
forwards
the
tape.
In
the
playback
mode:
Searches
picture
backward
or
forward.
In
the
still
playback
mode:
Adjusts
playback
speed
backward
or forward.
In the rewind or fast forward mode:
Obtains high speed picture.
Jog Dial
Locates
any
desired
frame
with
utmost
precision.
PLAY
Starts playback.
“D>” is fit.
For the repeat playback function.
NTSC SELECT
Set according to the colour TV system.
NTSC
P.B.:
For
TVs
that
can
receive
PAL
signals.
The
output
signal
is
the
quasi-PAL
system.
4.43:
When
receiving
NTSC
4.43
signals.
For
TVs
that
can
receive
NTSC
4.43
signals.
3.58:
When
receiving
NTSC
3.58
signals.
For
TVs
that
can
receive
NTSC
3.58
signals,
VIDEO IN (AV2)
Connects
a
video
cable
from
a
movie
camera
or
another unit.
AUDIO IN (AV2)
Connects
an
audio
cable
from
a
movie
camera
or
another unit.
Infra-red
Remote
Control
Receiver
Window
CVC (Crystal View Control) Indicator
This indicator is lit when the VCR is on.
Display
VA
Selects
the
required
programme
position
(TV
station)
of the VCR.
For tracking adjustment and vertical locking
adjustment.
© For manual tracking adjustment
The Vv and A buttons are used to adjust the
tracking
when,
for
example,
noise
bars
on
the
picture during normal playback are better removed
manually than by automatic digital tracking control.
To return to automatic digital tracking control, press
both buttons together.
®For siow tracking adjustment
When noise bars appear during still or slow
playback, switch over to slow playback and adjust
with the \v or A button to reduce the noise bars.
For vertical locking adjustment
Use the V and A buttons to minimize any vertical
jitter during still picture playback.
Set
VCR/TV
switch
to
VCR
for
using
VW
A
of
remote
controller.
©
®
®
REC/OTR
Siarts recording.
For One-Touch Recording (OTR),
TIMER REC
Turns
the
timer
recording
function
on
and
off.
© is lit or not fit.
Once
you
operate
the
timer
recording
function,
normal
VCR
operation
is
not
possible
unless
you
press
this
button
again
and
release
the
VCR
from
the
timer
recording
standby
mode.
SEARCH
Searches a recorded programme using the
Programme
list
search
after
timer
recording
and
using
the intro-jet scan functions.
REAR
®@
@
© 8 6868 6
6 8
VIDEO IN (AV1)
Connects
a
video
cable
from
a
movie
camera
or
another unit.
VIDEO OUT
Connects
a
video
cable
to
a
TV
or
another
unit.
RFIN
Connects the external aerial.
CH ADJ. (NV-HD670A only)
Adjusts
RF
transmitting
channel
AU31-43.
AC IN~
Connects the main power supply.
AUDIO IN (AV1)
Connects
an
audio
cable
from
a
movie
camera
or
another unit.
AUDIO OUT
Connects
an
audio
cable
to
a
TV
or
another
unit.
RF
OFF/TEST
SIGNAL
(NV-HD670A
only)
RF
OFF:
Set
to
this
position
when
the
VCR
is
connected
to
the
TV
via
the
Audio/Video
cable.
TEST SIGNAL OFF:
Set to this position when the VCR is
connected to the TV via RF coaxial cable
only.
TEST SIGNAL ON:
Set to this position when tuning the TV into
the VCR. The test signal is transmitted on
channel AU37 initially.
RF OUT
Connects the aerial terminal on a TV.
Video Playback Channel Selector
{NV-HD670EA only)
Selects the video playback channel.
i
aS)
~~
=
3
Q