a I tai& Flil tE E!=1r#
EBrr=v ryE!5Er!Eta
Your
own soundtrack
may be substituted onto a
previously
recorded tape by using either a microphone, tape
recorder, or
your
own component audio system.
CONNECTIONS
AUD|O
rN
(UR)
TAPE RECORDER
2.CHANNEL AUDIO DUBBING
USING
2 MICROPHONES
I Connect two
microphones
to the
MICROPHONE INPUT L and R Jacks.
2-CHANNEL AUDIO DUBBING USING TAPE RECORDER OR STEREO UNIT
Sounds are
recorded
on both
L
and
R
channels.
t Connect sound source to
AUDIO INPUT
(L,
R)
Jacks.
NI
IoPERAIT
First,
prq
@
oN--
:
O-:
F
@
kt
€H\
NOTE
rBesil
NOTE:
o
The sound from MICROPHONE
INPUTS takes
priority
over the one from
AUDIO INPUT.
e
For noise reduction,
set
DOLBY NR Switch to ON.
?
ftrsfl
p80E
:
Prr$t
3
RrSt
I
sum
H.,'di
P.ls* !
rcTE
r*r
ffir
rlq
rrl
NOTE:
o
Be
sure
that
both
MICROPHONE INPUT Jacks are open.
r
lf
either
AUDIO INPUT L
or
B
Jack
is
connected,
each channel will be
recorded with the same sound.
DOLBY NR Switch
Ir!.)Tf
;
.
X.:'IX"JJ'aROPHONE
INPUT L or R
JACK
is connected, this
sound
is
dubbed on both L and Fl
-37
-
To Next Page
Loading...
