Panasonic Omnivision PV-8200 - Page 26

Special
VCR
Features
*Important:
If
the
remote
control
POWER,
ACTION,
PROG,
CHA/¥
,
INDEX,
or
ADD/DLT
button
does
not
work when
pressed,
press
the
VCR button
on
the
remote
and
try the
button
again.
Veneck list before you begin.
O
Ati
connections
are
made.
(See
pages
6-9.)
Blue
Back
ON
JOFF
Fe
ature
C
VCR
is
plugged
in.
:
You
may
choose
whether or
not
you
want
the
VCR
to
display a
[
TV
is
tumed
on
and
set
to
the
VCR
channel
(CH
3
or
4).
solid
blue
back
screen
when
the
broadcast
signal
is
very
weak.
REC/TIME 1 Press ACTION to display
E the menu.
SET UP CHANNEL
1D10MA/ LANGUE: ENGL | SH
2 Press AV to select “SET | SELECT:A v kev
UP VCR,” and then END :ACTION KEY
press P to display the
“SET
UP
VCR”
screen.
UA
REPEAT
PLAY
:
ON
BEEPER
:
ON
3 Press AY to select (EA: ON
“NOISY CH BLUE BACK,” | geicor-a y ke
and then press P to ENO FACTION KEY
select “ON” or “OFF.”
* When “ON” is selected, a solid blue screen
appears whenever the signal is weak or
nonexistent. When “OFF” is selected, the picture
is displayed regardless of the signal condition.
The picture can not always be seen clearly when
“OFF” is selected.
í
\
O'T- NO
j 4 Press ACTION twice to exit.
Qda»
* When the VCR is connected to a Combination
VCR which has a Blue Back feature, even if
the VCR Blue Back is set to “OFF” on the VCR,
the screen will go to blue back.
66600!
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound
each time an invalid entry or incomplete operation is made,
VCR Lock Feature
A Press ACTION to
When activated, this feature prohibits all operations except i
for timer recording and tape eject. This feature may be display the menu.
used to keep young children from operating the VCR. SET CLOCK
x€cxXrKIÓéÚñÚúñkñÉñÉñÉññ——ñ———— eee SET UP CHANNEL
IDIOMA/ LANGUE: ENGL I SH
Hola gown REOT IME on D press AV to select SELECT: Y KEY
the without a cassette “SET UP VCR,” and then | $5 Eon Kev
inserted for 7 seconds nny ee press P to display the
while in Stop mode. “SET UP VCR” screen.
SET UP VCA
To Cancel the VCR PEREAT PLAY
: ON
Lock
feature,
ene
C
Press
AV
to
select
NOISY
CH
BLUE
BACK:
ON
with or without a cassette “BEEPER,” and then SELECT:à Y KEY
inserted, hold down press P to select o KEY
REC/TIME on the VCR “ON” or “OFF”
for 7 seconds again while
in Stop mode.
*
VCR
Lock
mode
is
cancelled
automatically
after
24
d
Press
ACTION
twice
to
hours as long as the clock is set. exit this screen.
26