Panasonic Omnivision PV-9661 - Page 119

file:///E:/PV-9661_PV-9662/SVC/s0502120100.html
5.2.12.1 Disassembly Procedure
TOP PREVIOUS NEXT
1. Remove the Capstan Belt.
2. Cut the Stopper with a cutter to remove.
3. Pull up on the Capstan Rotor Unit.
4. Remove 3 Screws (B). Then remove the Capstan Holder Unit.
5. Unhook Spring (B).
6. Turn the SS Brake Arm Unit so that the Tab (A) lines up with the niche. Then, remove the SS
Brake Arm Unit.
Fig. J11-1
file:///E:/PV-9661_PV-9662/SVC/s0502120100.html (1 z 2) [2006-01-28 11:10:20]