Panasonic Omnivision PV-C1321 - Clock and Memory Settings; Manual Clock Set Procedure

Press CH A Key to start
CHANNEL / CLOCK AUTO SET
operation. Settings are performed
_ automatically. If the setup is
completed, the following screen is
displayed.
ZENDE-MPRESSICHIUBIKE Vie
lf AUTO CLOCK SET IS
INCOMPLETE screen appears, set
the clock using MANUAL CLOCK
SET procedure as below.
es
:
MANUAL CLOCK SET
If AUTO CLOCK SET was incomplete,
manually set the clock as follows.
Press ACTION Key on the Remote
to display SET ehh Menu screen.
Press A ¥ to select the month and
press P to set. In the same manner,
select and set the date, year, time,
and DST. eee Saving Time)
Press ACTION Key twice to start
CLOCK and exit.
>
=.
0
#2)
0
_—
=
S
SELECT/
SET
4#:CH UP
v:CH DOWN
> :VOL UP
4:VOL DOWN
ACTION
Reset all unit Memory Functions
When moving unit to a new location, or if a
mistake was made in the Initial Setup
section.
¢ Make sure a tape is not inserted in the unit. .
1 Turn the unit
Power on.
2 Press and hold both PLAY and
FF on the unit for more than 5
seconds.
¢ The power will shut off.
* Please ignore NO CASSETTE
warning.
3 Do “initial Setup” on page 8.
9