Setting the clock is divided into three sections; Set the Time Zone, Set the Daylight
Saving Time, and Set the Date and Time. Please follow instructions in the order
presented. Before you begin...
The Palmcorder is set to the Eastern
Standard time zone at the factOry. If you
live in a different time zone, follow the
steps below to change it. Then, when
traveling, rather than resetting the clock to
the local time, you can simply set the
appropriate time zone.
• Connect the Palmcorder to a power source.
• Set the POWER switch to VCR or CAMERA,
• Note:
CLOCK SET menu disappears if, after
activation. CLOCK SET UP ,ilk,,DOWN • or
DISPLAY buttons are not pressed witllin 30
seconds.
The Pafmcorder's ctock may lose or gain up
to two minutes per month. Please adiust as
necessary (refer tO page !3).
DISPLAY
Time Zone chart
Press CLOCK SET UP • to display
the CLOCK SET menu.
Press UP • or DOWN v repeatedly
to selectlil_=lI=[qtlhV_l=t_(t]Ol_l from
the CLOCK SET menu_
Press DISPLAY to display the
SELECT TIME ZONE menu.
- - * SELECT 11ME ZOt4E- --"
H,_WJ_JI
MOUNT_L/N _A
_ ; PUSH DISPLAY !(IE_
Press UP • or DOWN • repeatedly
to select one of the eight time zones of
the location where you are using the
Palmcorder.
Press DISPLAY to fix the Time Zone.
The CLOCK SET menu appears.
To exit from the CLOCK SET
menu, select _ and press
DISPLAY.
i Note:
When you travel outside the eight time
zones right, please set the clock
manually (see page 13).
11
To Next Page
Loading...
