.
Charge the Battery Pack fully before operation (see page 7),
.,J
1 Attach the Battery (see page 7).
Make sure Battery is charged before
use (see page 7).
Slide the TAPE EJECT switch to open
the door.
Insert a cassette (see page 10).
Press here to close the door.
_ 5Set the POWER switch to CAMERA.
Built-In Lens Cover opens and POWER
Lamp lights.
Slide the TAPE SPEED Selector for
SP or SLP (see page 10).
With the Eye Cup up to your eye,
adjust the Vision Adjustment Control
to your eyesight.
Press RECORD/PAUSE _
recording.
Press RECORD/PAUSE again t_0...pause
[_ recording (see page 20).
POWER Lamp
1 Set the POWER switch to VCR.
n 9,,=wPress REWIND/SEARCH to rewind the
tape.
3Press PLAY to start ptayback.
4 Press STOP to stop playback.
6
To Next Page
Loading...
