Panasonic Palmcorder IQ PV-IQ604 - Camera Recording; Simple Recording

Before you begin...
• Connect the Palmcorder to a power source
(Battery Pack, AC Adaptor or Car Battery Cord.)
• insert a cassette with record tab (see page 11).
_.i ECORD/_
AUSE |
utton J
\
2
(_APE EJECTj_
16
POWER
OFF
VCR CAMERA
Set the POWER switch
to CAMERA. Buit-ln
Lens Cover opens.
EVF
L
J
Record/Pause
mode.
Underside View
(PV-IQe04)
With the Eye Cup ._...... I _.
against your eye, adjust VisionAdjustmem_
theVision Adjustment _Control j/
Control to your eyesight.
SPEED
SLP
=;
Slide the TAPE SPEED Sq;lector
for (SP or SLP). (Refer to page 11.)
_c
(_) Slide the Record Button Cover up
or down to protect or access the
Record button.
(_) Press RECORD/PAUSE
to start recording.
The Tally Light and Recording Indicator
are litduring recording.
Press RECORD/PAUSE again to pause
recording.
Helpful Notes:
• To remove the cassette
In Record/Pause mode, slide the TAPE
EJECT switch.
-To conserve power
After 5 minutes Record/Pause will
automatically go intoStandby mode.
To resume recording, set the POWER
switch to OFF and then CAMERA.