Before you begin...
• Set the POWER switch to CAMERA.
____.NORMAL_
f
This feature helps stabilize the picture in
situations such as walking or shooting from
a moving vehicle.
EIS
Press EIS to activate the D.E.I.S. function.
("EIS" will appear in the EVF.)
• The image in the EVF will be enlarged
slightly and the shutter speed will be
automatically adjusted from 1/80 to 1/250
according to the brightness of the subject.
EIS
Press EIS again to cancel.
• You may also use the High Speed Shutter
function (from 1/100 to 1/10000).
The shutter speed you select remains
active even after you cancel the D.E.I.S.
function.
• Be sure that the D.E.I.S. is turned off when
not needed..
D.E.I.S. may not function when ...
• Palmcorder movement is too extreme.
• recording a subject with distinct horizontal
or vertical stripes.
• recording in low lightsituations.
• EIS indicatorflashes when the light level is
inadequate.
• recording a subject under a great amount
of fluorescent light.
• recording a scene with very fast motions.
26
To Next Page
Loading...
