Panasonic Palmcorder IQ PV-IQ604 - Supplying Power; Use the Battery Pack

II _
.................. I
2
Indicator
3 (A)
(B)'
_aotntnfir/mCha rgiMgrke_'_r_
Charge the Battery Pack fully before operation.
1
Plug in the AC Adaptor. 8A_ER*
REFRESH
POWER CHARGE
,,1/
lights up.
Power Indicator
Insert the Battery
Slide the top of the Battery forward then
press down until itlocks with a click.
• BatteryPackchargesinabout1 hour.(PV-IQ504)
• BatteryPackchargesinabout2 hours.(PV-IQ604)
BA'I-rERY
REFRESH
POWER CHARGE
ChargeIndicator lights up.
Remove the Battery
(A) Slide Battery forward.
(B) Lift up and out. BATTERY
REFRESH
POWER CHARGE
o o (____
Charge Indicatorgoes out when
charging is done.(About one hour.)
• With a fully chargedBattery Pack, you will haw
about 0.8 hourof continuoususe. (PV-IQ504)
• Witha fully chargedBattery Pack,you willhav_
about 1.5hoursof continuoususe. (PV-IQ604)
Use the Battery completely before
recharging.
Note:
After recharging the Battery Pack about 5
times, use the BATTERY REFRESH
feature as explained on page 10.
*Use this marker as a reminder to yourself
when the battery is fully charged or in need
of a charge. This marker performs no
function and is for your reference only.
8
2
.Z
To Attach the Battery
Align the battery with the top oi th_
mounting surface and press it firmly into
place until it locks with a click.
2
To Remove the Battery
While sliding the BATTERY RELEASE
button, remove the Battery from the
mounting surface.