Panasonic Palmcorder PalmSight PV-L557 - Setting the Clock; Setting the Time Zone

Setting the Clock
Setting the clock is divided into four sections: Time Zone, Daylight Saving Time, Date and
Time, and Clock Battery. Follow instructions in the order presented.
Setting the Time Zone
The Palmcorder is set to Eastern time zone
from the factory. If you live or are traveling
in a different time zone, follow the steps to
select the appropriate time zone from the
menu screen.
DISPLAY
Before you begin...
* Connect the Palmcorder to a power source.
* Set the POWER switch to VCR or CAMERA.
Note:
The Palmcorder will exit the CLOCK SET
menu if, after activation, none of the CLOCK
SET UP/DOWN, (4/¥) or DISPLAY buttons
are pressed within 30 seconds.
The Palmcorder's clock may lose or gain up
to two minutes per month. Please adjust as
necessary (refer to page 13).
pa11e]s Buas
1 Press CLOCK SET UP A to display
the CLOCK SET menu.
Press UP A or DOWN Y repeatedly
to select BES Seu Usi.
3 Press DISPLAY to display the
SELECT TIME ZONE menu.
A hiss UP A or DOWN Y repeatedly
to select desired time zone.
5 Press DISPLAY to fix the Time Zone.
The CLOCK SET menu appears.
To exit from the CLOCK SET
menu, press DOWN Y to select
CRANE), and then press DISPLAY.
Note:
When you travel outside the eight time zones
shown in the time zone chart at the left,
please set the clock manually (see page 13).
11