Panasonic Palmcorder PalmSight PV-L557 - Setting the Clock (cont.); Setting Date and Time

Setting the Clock
Setting the Date and Time
The date and time is calculated, including
leap year, up to DEC 31 2095.
«l^ Vl
-5-00:006PM-
JAN i rede
Before you begin...
* Connect the Palmcorder to a power source.
* Set the POWER switch to VCR or CAMERA.
Note:
The Palmcorder will exit the CLOCK SET
menu if, after activation, none of the CLOCK
SET UP/DOWN, (4/¥) or DISPLAY buttons
are pressed within 30 seconds.
1 Press CLOCK SET UP A to display
the CLOCK SET menu.
2 Press UP A or DOWN Y repeatedly
to select EMBA.
3 Press DISPLAY to display the
DATE/TIME SETTING menu.
ZE rais UP A or DOWN Y repeatedly
(or hold down) to enter the desired
numbers, then press DISPLAY to fix
that portion and move on.
ly MAY xls
:0 GP M- 6:00700PM
199'6 JAR'1 1996
Adjust the flashing digits for the hour,
minute, month, day, and year.
When you finish setting the year, the
clock starts operating, and the CLOCK
SET menu appears.
To exit from the CLOCK SET menu,
press DOWN Y to select EXA, and
then press DISPLAY.
13
peuejs Dunje5