Panasonic Palmcorder PalmSight PV-L557 - Electronic Viewfinder;LCD Monitor Indications; Tape and Battery Indicators; Recording Date and Time Display; Display-Off Mode

Electronic ViewfinderlLCD Monitor Indications
peyeys Buya
Tape/Battery Remaining
The tape remaining and battery charge level can be displayed during recording.
1 Set the POWER
switch to CAMERA.
2 Press DISPLAY repeatedly
to select the desired display.
EVF/LCD Monitor Indications
Fifth First
press press
Battery charge Tape T (initial screen)
Remaining: Remaining:
-Bd- (No tape)
FULL NENNEN LI NENNEN FULL
| E Second
EMPTY.* T. í press
E -kd -CL EMPTY oa =) Third (ome s
* It will take several seconds for the tape press
remaining indicator to operate after the
tape starts moving.
Recording the Date and Time UE
I Set the POWER 2 press DISPLAY
Switch to CAMERA. twice to change m—— Et
the display to date Ue
only. Press once
or twice more to
remove the date/
time display.
When placed in
Record mode, the
time and date will be
recorded on the
tape.
Note:
| Only the Date and/or Time indications are recorded on the Tape. |
Display-Off Mode
This feature allows you to remove all Electronic Viewfinder/LCD
Monitor Indications except Intelligent Titler (see page 31).
Before inserting a tape, press DISPLAY and STOP together
for more than one second to remove the indications except time
and date".
To display the Electronic Viewfinder indications again, turn the Pace
Palmcorder Power off and then on again.
* To remove the time and date, press the DISPLAY button
repeatedly.
15